ADVANTAGES OF THE FIRMWARE
- Bypass Google Account Verification(FRP)
- Removes Password,Pin & Pattern
- Recover your Phone if flashed with wrong file
- Fix stuck on boot Logo issue
- Fix Application has stopped working issue
- Fix slow processing issue
- Reset Wi-Fi,Bluetooth & Mobile Networks
- Refreshes your phone to as a new phone
- E.t.c
Requirements for Flashing Process:
How to Flash MOBICEL RIO-SS Stock ROM:
- Download and install the Spreadtrum Drivers on your computer. If the driver is already installed, skip this step;
- Download the Stock Rom/Firmware ( *Pac ) you have downloaded here
- Extract the Spreadtrum Upgrade Tool on your computer.
- Just run the UpgradeDownload.exe in the file you extracted;
- Once the Spreadtrum Upgrade Tool starts, click on the Load Packed button and add the file (stock ROM which comes in (*Pac) format)
- After successfully adding Pac file in Spd Flash Tool , click Start Download button;
- Make sure your device is completely turned off, and press the keyboard bootkey (V+ or V-) or press all buttons at the same time(Volume+,Volume_ + Power Button)
- While holding the buttons ...Connect your phone with Usb cable to Computer and the process will start automatically.
- Once the flash is complete, you can see the green message "Passed"
- After seeing the green message "Passed" disconnect it ...remove the battery and put back then switch it on.
- You Have successfully flashed your Mobile Phone!!!!!
- Download and install the Spreadtrum Drivers on your computer. If the driver is already installed, skip this step;
- Download the Stock Rom/Firmware ( *Pac ) you have downloaded here
- Extract the Spreadtrum Upgrade Tool on your computer.
- Just run the UpgradeDownload.exe in the file you extracted;
- Once the Spreadtrum Upgrade Tool starts, click on the Load Packed button and add the file (stock ROM which comes in (*Pac) format)
- After successfully adding Pac file in Spd Flash Tool , click Start Download button;
- Make sure your device is completely turned off, and press the keyboard bootkey (V+ or V-) or press all buttons at the same time(Volume+,Volume_ + Power Button)
- While holding the buttons ...Connect your phone with Usb cable to Computer and the process will start automatically.
- Once the flash is complete, you can see the green message "Passed"
- After seeing the green message "Passed" disconnect it ...remove the battery and put back then switch it on.
- You Have successfully flashed your Mobile Phone!!!!!
NOTE: the file is not free ... COST: 3$/ 200MT/ R5O /K3500
Mpesa: +258 846054515
Emola: +258 874842151
Airtel Money Mw: +265 996381439
Mpamba TNM: +265880425308
PayPal: Stevenchisale2021@gmail.com
E-wallet also Available for Payments!
0 Comments