ADVANTAGES OF THE FIRMWARE
- Bypass Google Account Verification(FRP)
- Removes Password,Pin & Pattern
- Recover your Phone if flashed with wrong file
- Fix stuck on boot Logo issue
- Fix Application has stopped working issue
- Fix slow processing issue
- Reset Wi-Fi,Bluetooth & Mobile Networks
- Refreshes your phone to as a new phone
- E.t.c
Requirements for Flashing Process:
How to Flash Itel V51 LTE(L5007S) Stock ROM:
- Download and install the Spreadtrum Drivers on your computer. If the driver is already installed, skip this step;
- Download the Stock Rom/Firmware ( *Pac ) you have downloaded here
- Extract the Spreadtrum Upgrade Tool on your computer.
- Just run the UpgradeDownload.exe in the file you extracted;
- Once the Spreadtrum Upgrade Tool starts, click on the Load Packed button and add the file (stock ROM which comes in (*Pac) format)
- After successfully adding Pac file in Spd Flash Tool , click Start Download button;
- Make sure your device is completely turned off, and press the keyboard bootkey (V+ or V-) or press all buttons at the same time(Volume+,Volume_ + Power Button)
- While holding the buttons ...Connect your phone with Usb cable to Computer and the process will start automatically.
- Once the flash is complete, you can see the green message "Passed"
- After seeing the green message "Passed" disconnect it ... then switch it on.(If it does not turn on.... try to disconnect the battery and reconnect again and switch on)
- You Have successfully flashed your Mobile Phone!!!!!
- Download and install the Spreadtrum Drivers on your computer. If the driver is already installed, skip this step;
- Download the Stock Rom/Firmware ( *Pac ) you have downloaded here
- Extract the Spreadtrum Upgrade Tool on your computer.
- Just run the UpgradeDownload.exe in the file you extracted;
- Once the Spreadtrum Upgrade Tool starts, click on the Load Packed button and add the file (stock ROM which comes in (*Pac) format)
- After successfully adding Pac file in Spd Flash Tool , click Start Download button;
- Make sure your device is completely turned off, and press the keyboard bootkey (V+ or V-) or press all buttons at the same time(Volume+,Volume_ + Power Button)
- While holding the buttons ...Connect your phone with Usb cable to Computer and the process will start automatically.
- Once the flash is complete, you can see the green message "Passed"
- After seeing the green message "Passed" disconnect it ... then switch it on.(If it does not turn on.... try to disconnect the battery and reconnect again and switch on)
- You Have successfully flashed your Mobile Phone!!!!!
- NOTE: The File is not Free....it cost 200MT (K3000) (3$)
- The File has been Tested and works 100% without risk of damage and brink.Remember to contact me for the Password.
Payment methods
Mpesa: +258 846054515
Emola: +258 874842151
Airtel Money Mw: +265 996381439
Mpamba TNM: +265880425308
PayPal: Stevenchisale2021@gmail.com
E-wallet also Available for payment!
- NOTE: The File is not Free....it cost 200MT (K3000) (3$)
- The File has been Tested and works 100% without risk of damage and brink.Remember to contact me for the Password.
Payment methods
Mpesa: +258 846054515
Emola: +258 874842151
Airtel Money Mw: +265 996381439
Mpamba TNM: +265880425308
PayPal: Stevenchisale2021@gmail.com
E-wallet also Available for payment!
 Pac* ){kind=link}
0 Comments